TIPS ABOUT HOW TO Extend Smok Pen Recharge Time

smok pen

TIPS ABOUT HOW TO Extend Smok Pen Recharge Time

The Smok Pen is really a new pen that was created by two guys in California. They wanted to create a cool writing instrument that appeared as if a real pen but had the opportunity to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has had the marketplace by storm.

The Smok Pen includes a built quality that is just great. I came across that even though it is an electronic pen the build quality is simply as good as the pens that I have reviewed. This is because of how they made the most notable cap. You don’t need to be worried about the cap cracking or breaking on you Smok Valve Pen.

Both biggest differences that separate the Smok Valve from other pens may be the shape of the coils and the way that they are built. Generally the coil on a Smok Pen is larger than on other pens. I think that they did this on purpose, to make the pen feel bigger.

If you take a look at a Smok Pen, you will notice that your body of the pen is round and not smooth like other pens. On the trunk of the pen there exists a little tab that houses the coil. Once you press on the tab you can actually turn the heating element on and off. I really liked this feature since it allows me to use the Smok Pen 22 whenever I feel like smoking.

To use the Smok Pen you must keep carefully the heat Vape button pressed. After the button is pressed, the heating element will begin to warm up. Once it gets to the appropriate temperature it is possible to turn off the heating element. Smok recommends utilizing a 22mm tank. I prefer a more substantial tank, but that’s just me.

Once you put your Smok Pen into the tank you will see a indicator light come on. The indicator light will remain green if you don’t put your Smok Pen in to the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. It is important to always put your pen in to the charger before you apply the e-liquids to the coil heads. It is also important to do this before putting your e-liquids in to the coil heads.

After you have completed this step, you should always check to see should you be at the proper temperature for the coils to fire. Or even then you should turn the energy off and try again. When you are still not satisfied together with your Smok Pen then I suggest you take it set for some troubleshooting. This is what I’d call the “troubleshooting process” because sometimes things just do not work as they should. It is suggested that you perform the next two steps, then go ahead and check the Smok Pen to see if it still has the electronic charging port.

Before you go any further you should remove the battery from your own pen and unscrew the magnetic cap. You should then take away the plastic sleeve that holds the sub-ohm. There is a wire that runs through the Smok’s body which is green in color. You should loosen this wire using pliers. Once you have loosened this wire after that you can access the sub-ohm. You need to then remove the wire from the Smok’s body and carefully insert it into the Smok pen’s electrical port, being careful never to touch any of the coils.

Once you have placed the sub-ohm tank into the pen you should then place all of those other components including the wattage, the batteries and the heating element in to the included microwaveable microwave oven. Start the power and follow the on screen instructions. You should place the pen’s battery into the microwave and activate the setting. You should then wait approximately 30 seconds before turning it back off. When you initially put the pen in to the microwave the electronic reading will show a minimal voltage protection setting. If this setting does not automatically get set then you should follow the on screen instructions.

Once the Smok Pen has reached the temperature that it needs to reach you should then connect the two wires to the negative and positive on the positive post on the Smok unit. You should then connect the other end of the battery to the negative post on the negative side of the Smok unit. The final step would be to connect the positive cable to the bottom of the Smok’s power switch.

After all of the components have been placed in to the pen, you should turn the energy on. Following the first test run, you ought to be able to start to see the battery life indicator light seriously. If you don’t see any sign of life from the Smok Pen, you need to take away the battery from the pen and then replace it with a fresh one. For your convenience there is also a green light that could be pressed to be able to confirm the battery charging status. If you have done these things and you also do not see the green light indicating charging, you need to replace the battery.